Specialist roof design and supply service, SIG Design & Technology, has been named winner of the Best use of Hard Metal Roof category at the RCI Pitched Roofing Awards.
SIG Design & Technology received the award for its work with […]
-
SIG Design & Technology wins RCI Pitched Roofing award
SIG Design & Technology wins RCI Pitched Roofing award
-
Our Top Five Roofing Design Blog Posts of 2020
Our Top Five Roofing Design Blog Posts of 2020
Last week we kicked off our top ten roofing design blog posts published in 2020 with numbers ten to six. Here are the top five most read roofing design blog posts this […]
-
What is the future for hotel design after covid? #ATHotels
What is the future for hotel design after covid? #ATHotels
Next week we’ll be taking part in the Architecture Today seminar “What is the future for hotel design after covid?” which takes place on Thursday 26th November.
The worldwide pandemic has changed people’s priorities and the hotels sector is […]
-
Flat Roof Upstand Best Practice
Flat Roof Upstand Best Practice
One of the most common questions our specification managers are asked is, ‘what should the upstand be on a flat roof?’. This question is frequently followed by, ‘what if I haven’t got 150mm?’. This article is about why upstands exist […]
-
SIG Roof Lines: The RIBA Journal April 2017
SIG Roof Lines: The RIBA Journal April 2017
This week the April issue of RIBA Journal is published, complete with our tenth technical guide: SIG Roof Lines.
This issue features the complex roofing challenge at Birmingham New Street Station, a salutary tale about Flat Roofs on Schools and an […]
-
Flat Roof Specifier Checklist Part 4: Interfaces and Cost
Flat Roof Specifier Checklist Part 4: Interfaces and Cost
In this post, we’re covering the final two design factors on our checklist for flat roof specification: flat roof interfaces and cost. These factors round up the design stage of the checklist and we can then move on to […]
-
Flat Roof Specifier Checklist Part 3: Design Factors: Drainage, Insulation and Upstands
Flat Roof Specifier Checklist Part 3: Design Factors: Drainage, Insulation and Upstands
We’re well into our checklist of questions to ask when you’re choosing and designing the right flat roof system. Whilst the preliminary questions on client requirements, aesthetics and structure set the broad parameters, the questions we are now going […]
-
Flat Roof Specifier Checklist Part 2: Design Factors: Aesthetics and Structure
Flat Roof Specifier Checklist Part 2: Design Factors: Aesthetics and Structure
Last time we introduced our Flat Roof Specifier Checklist and looked at the requirements your client might have. This week we begin talking about the design factors, starting with Aesthetic requirements and Roof Structure.
Would you like a copy of […]
-
Flat Roof Specifier Checklist Part 1: Employers Requirements
Flat Roof Specifier Checklist Part 1: Employers Requirements
Choosing the right flat roof system can be a challenge, but ask the right questions and you’re half way there.
At our seminar in November we launched a new tool for architects – a Flat Roof Specifier Checklist. Our checklist […]
-
School Roofing – Seven more Value Engineered Projects
School Roofing – Seven more Value Engineered Projects
School Roofing today requires a collaborative approach, robust specification and cost efficient product selection. In this case study we look at seven projects which deliver just that.
SIG Design & Technology and SIG Insulation are working […]
Recent Comments